Steel Garden Bed Edging | Stainless Steel Garden Edge | Steel For Garden Edging (per foot)
Stainless steel garden edging
$10
Stays bright, no rust run-off: 304 stainless resists rust and corrosion with ordinary care, so it will not stain pale pavers or concrete.
Hammer the spikes through the tabs: One 3.9-inch spike per foot. Set the section on your line and drive them in. No trench, no landscaper.
Three face heights: 2 inches for a subtle line, 4 inches for a standard bed edge, 8 inches to hold back a deeper bed.
3.28 ft sections that interlock: Each section locks into the next for a continuous line. Cut with a hand saw for a short run. Sold per foot, no minimum.
Face height: 2" Face Height (per ft)
Price:$10per foot
Delivery time: up to 7 working days by tracked courier, after dispatch within 2 working days
Free delivery across the United States on orders $60+, otherwise a flat $22
Pay by card or PayPal, handled by the payment provider
Tracked delivery anywhere in United States. It is free on orders of $60 or more, and a flat $22 below that. Allow up to 7 working days in transit after dispatch within 2 working days.
For an eligible change-of-mind return, contact us within 15 days of purchase. The item must be unused, in original resaleable condition, with proof of purchase. A $60 restocking fee applies and you pay return postage. See our returns policy for exclusions and instructions.
Your rights under applicable federal and state consumer law are separate. For faulty, damaged or incorrect goods, no change-of-mind restocking fee applies. We arrange the appropriate repair, replacement or refund and cover applicable return postage.
Stays bright, no rust run-off304 stainless resists rust and corrosion with ordinary care, so it will not stain pale pavers or concrete.
Hammer the spikes through the tabsOne 3.9-inch spike per foot. Set the section on your line and drive them in. No trench, no landscaper.
Three face heights2 inches for a subtle line, 4 inches for a standard bed edge, 8 inches to hold back a deeper bed.
3.28 ft sections that interlockEach section locks into the next for a continuous line. Cut with a hand saw for a short run. Sold per foot, no minimum.
About this product
A clean silver line that will not rust.
304 stainless steel edging in 3.28 ft interlocking sections. Choose a 2, 4 or 8 inches face. Spikes included, sold by the foot.
Around pavers, a patio or a driveway, you want an edge that stays bright and does not bleed rust onto the concrete. 304 stainless does exactly that.
Each section is 3.28 feet long and locks into the next, with one 3.9-inch spike per foot that you hammer through the tabs. No trench. Cut it with a hand saw for a short run. Pick 2 inches for a subtle line, 4 inches for a standard bed edge, or 8 inches to hold back a deeper bed.
Beside pavers, a patio or a drive, you want an edge that stays bright and never bleeds rust onto the concrete. 304 stainless does exactly that, and it keeps its clean silver line for years.
Each section is 3.28 feet long and locks into the next. One 3.9-inch spike per foot hammer through the tabs, so there is no trench to dig. For a short run, cut it with a hand saw.
Choose a 2-inch face for a subtle line beside paving, 4 inches for a standard bed edge, or 8 inches when you are holding back a deeper bed of bark, stone or soil.
Still deciding?
Not sure yet? That is fine.
For an eligible change-of-mind return, contact us within 15 days of purchase. The item must be unused, in original resaleable condition, with proof of purchase. A $60 restocking fee applies and you pay return postage. See our returns policy for exclusions and instructions.
Your rights under applicable federal and state consumer law are separate. For faulty, damaged or incorrect goods, no change-of-mind restocking fee applies. We arrange the appropriate repair, replacement or refund and cover applicable return postage.
Putting a clean silver line around pavers, a patio, a path or a bed, especially next to pale surfaces where rust would show. It keeps gravel, soil and turf on their own side.
Which height should I pick?
2 inches for a subtle line beside pavers or lawn. 4 inches for a standard bed edge. 8 inches when you are holding back a deeper bed of bark, stone or soil.
What do I get per foot?
One 3.28 ft section that interlocks with the next, plus one 3.9-inch steel spike per foot.
How do I install it?
Mark your line, set the section on it, and hammer the spikes through the tabs with a mallet. Lock the next section on and carry on. No digging needed in normal soil.
Can it follow a curve?
Gentle curves, yes. The 0.02-inch steel flexes enough for a sweeping bend. For tight corners, cut and join.
Can I cut it?
Yes. Measure what you need and cut with a hand saw. Wear gloves and eye protection and file the cut smooth.
What is it made of?
304 stainless steel, 0.02 inch thick. It resists rust, corrosion and cracking with ordinary care.
How much does it cost?
2": $10; 4": $12; 8": $15 per foot. Delivery is free once your order is $60 or more. Under that it is a flat $22.
Are there other sizes or options?
Three face heights. Pick the height before you add it to your basket and the price updates.
What do the photos show?
The edging in place around pavers, paths and beds so you can judge the look. Plants, pots and garden props are not included.
Which specs should I check before I buy?
Face height (2, 4 or 8 inches), section length (3.28 ft), thickness (0.02 inch) and the spike per foot. If anything is unclear, ask us first.
How do I work out how many feet I need?
Measure the edge and round up to the next foot. Add a little for corners and cuts, then check your basket before paying.
Can I order more than one foot?
Yes. Set the quantity to the number of feet you need, on this page or in your basket.
Will it suit every garden?
It suits most paths, patios and beds in normal soil. Very rocky ground can stop a spike, so shift the section slightly or lift the stone out. If you are unsure, send us a photo and your measurements before you order.
How should I prepare the ground?
Mark your line with string, clear weeds and loose stones, and check for shallow pipes or cables before you drive spikes in.
Any safety tips while fitting it?
Wear gloves, since a cut edge can be sharp, plus sturdy footwear. Use a mallet and keep kids and pets clear while you hammer.
What if the ground is hard or stony?
Water the line the day before so the soil is softer, and move the section an inch or two if a spike hits a rock. Do not force it, the thin steel will kink.
Can I use it as a retaining wall?
No. The 8-inch face holds back a shallow bed, but it is a garden edge, not a retaining wall. It is not load bearing.
How do I look after it?
Hose off soil and grass clippings now and then so nothing sits on the surface. Check the sections are still locked after heavy rain.
Can I check it will suit my garden before I buy?
Yes. Send us the measurements, a photo of the edge and what you have there now, and we will tell you straight which height to go for.
Is the price in US dollars?
Yes. Product prices and checkout totals are in US dollars.
What does delivery cost?
Delivery is free when the goods total after any discount is $60 or more. Otherwise the delivery charge is $22.
How long does delivery take?
Allow 2 working days for dispatch, then up to 7 working days for delivery by tracked courier. These are estimates, not a promised arrival date.
Can I use the valued-customer code?
Yes. It takes 15% off the goods. Delivery is not discounted, and free delivery is worked out on the discounted goods total.
How do I track my order?
Use the Order Tracking page with the details we send after dispatch. If anything looks stuck, email us with your order reference.
Can I return it if I change my mind?
Yes, within 15 days of purchase for an unused item in original resaleable condition with proof of purchase. A $60 restocking fee applies and you pay return postage. Your rights under federal and state consumer law are separate.
What if it arrives damaged or wrong?
Contact us with your order reference and photos, ideally within 7 days so we can investigate quickly. No restocking fee applies to faulty, damaged or incorrect goods. We arrange the repair, replacement or refund and cover the return postage.
Can I cancel before it ships?
Contact support as soon as possible. The voluntary cancellation policy allows requests within 12 hours of ordering, before shipment, with a 12.5% processing fee. The fee does not apply where it would limit a statutory remedy.
I have a big project. Can you help?
Yes. Use the wholesale enquiry page and tell us the products, quantities and your delivery postcode.
Where do I get help?
Email theteam@lawnedge.store or use the Contact page. Include the product name and your question, plus your order reference if you have one.
The complete guide
Stainless edging: the complete guide
3 min readLawn Edge Company USA
Most metal edging is chosen for the look of the metal. Stainless is chosen for what it does not do. It does not rust, it does not stain the pale concrete next to it, and it does not need any coating to stay that way. That makes it the edge for pavers, patios and anywhere a mark would show.
Sizes and specifications
3.28 ft sections that interlock into a continuous line
Three face heights: 2, 4 or 8 inches
304 stainless steel, 0.02 inch thick
Three 4 inches steel spikes per foot, driven through the tabs
Sold by the foot, no minimum
How the sections connect
Each section locks into the next so the line reads as one piece. The spikes go through tabs on the face.
How to fit it
Mark your line with string and clear weeds and loose stones.
Check for shallow pipes or cables before you drive spikes in.
Set the first section on the line, bright face out.
Hammer the spikes through the tabs with a rubber mallet until the section sits firm.
Lock the next section on and spike it. Carry on along the line.
For a short run, cut with a hand saw. File the cut edge and wear gloves, since it can be sharp.
Where it works
Around a paver patio or path, where it holds the pavers tight and stays bright. Along a drive. Between gravel and lawn. Around a bed, where the 8 inches face holds back bark or soil. It flexes enough for a sweeping curve. For tight corners, cut and join.
Is it right for the job?
The 0.02-inch steel is lighter than our black or corten sections, which makes it easier to cut and handle, and means you should not force it against buried rock. If you want a heavier gauge in black, see the black steel edging. For the rusted look, see the corten edging. Beside pale paving, this is the one.
Looking after it
Hose off soil and grass clippings now and then so nothing sits on the surface. With that bit of care, 304 stainless resists rust, corrosion and cracking for years.
Not sure which material suits your ground, or how many feet a curved bed needs? Ask before you order. Free delivery across the United States on orders of $60 or more after discounts.
Stainless steel garden edging, sold by Lawn Edge Company USA at lawnedge.store. 304 stainless steel edging in 2, 4 or 8 inches face heights, 0.02-inch thick, interlocking 3.28 ft sections with one 3.9-inch spike per foot, hammered in. 2": $10; 4": $12; 8": $15 per foot. Material: 304 stainless steel; Face heights: 2 inches, 4 inches or 8 inches; Section length: 1 metre / 3.28 feet; Thickness: 0.02 inch; Spikes: 1 per foot, 3.9 inches long. Delivery across the United States: free from $60 after discount, otherwise $22. Handling 2 working days, delivery up to 7 working days.
Stainless steel garden edging, 2" Face Height (per ft)
Stays bright, no rust run-off: 304 stainless resists rust and corrosion with ordinary care, so it will not stain pale pavers or concrete.
Hammer the spikes through the tabs: One 3.9-inch spike per foot. Set the section on your line and drive them in. No trench, no landscaper.
Three face heights: 2 inches for a subtle line, 4 inches for a standard bed edge, 8 inches to hold back a deeper bed.
